Atomos A-EYE 4K 20x PTZ Camera

Precision optics. Seamless IP streaming. Built for the cloud.

The Atomos A-EYE 4K 20x PTZ Camera redefines live production with broadcast-quality imaging, smooth movement, and built-in IP workflows. It’s the intelligent choice for modern streaming, hybrid productions, and remote collaboration.

Powerful 4K Optics with 20x Zoom

Equipped with a 1/2.8 CMOS sensor, the A-EYE captures detailed 4K Ultra HD video at up to 60 frames per second. The 20x optical zoom delivers smooth, responsive transitions from wide shots to tight close-ups, giving creators full framing flexibility without compromising clarity.

NDI® | HX3 and IP-Based Production

With built-in support for NDI®|HX3, the A-EYE delivers high-efficiency, low-latency video over standard Ethernet networks. Additional protocols like RTMP, RTSP, SRT, and VISCA-over-IP ensure broad compatibility with IP production environments, whether local or remote.

Effortless Control and Deployment

The A-EYE can be operated via VISCA or IP-based control systems and integrates with third-party hardware and software controllers. Power over Ethernet++ (PoE++) simplifies installation by delivering power, video, and control over a single cable—ideal for studios, event spaces, churches, and corporate environments.

Key Features

• 1/2.8 CMOS sensor with 4K Ultra HD (3840 x 2160) resolution
• 20x optical zoom lens with precise pan/tilt motion
• NDI®|HX3, RTMP, RTSP, SRT, and VISCA-over-IP support
• PoE++ for single-cable setup
• Low-latency IP transmission and remote control capability
• Ideal for live events, worship services, education, and corporate AV

Who is it for?

The A-EYE 4K 20x PTZ Camera is designed for creators and professionals who need high-quality remote video capture without complexity. From livestreamed performances and church services to multi-camera conferences and hybrid broadcasts, A-EYE delivers exceptional performance in a compact, cloud-ready package.

What’s in the box?

• A-EYE 4K-20X PTZ camera
• RS-232 serial cable (2m)
• USB 3.0 A-A cable (1.5m)
• Lens cover
• Remote controller
• Accessory tray
• Wall mount rack
• Screw pack
• Power adaptor with 4 international plugs
• Quick Start Guide

Enhance your Atomos PTZ experience with the A-EYE PTZ Control!

A-Eye Control is a dedicated remote-control hub that enables advanced multi-camera operation, preset switching, and remote production over IP with A-Eye cameras.

A-Eye is a powerful new range of AI-enhanced PTZ cameras that combine intelligent tracking, high-quality video, and seamless connectivity. Designed for educators, content creators, business professionals, worship leaders, and live event teams, the A-Eye series makes multi-camera production simple, scalable, and professional—no camera operator required.

Click here to View the Atomos A-EYE PTZ Control

The post A-Eye 4K-20X – PTZ Camera (B-Stock) appeared first on Atomos.

Designed in tandem with the Studio PRO-2710, the K-100 also provides precise calibration for other Atomos devices.

The post Studio K-100 – Spectral Calibration Probe (Preview) appeared first on Atomos.

• Smarter Color Workflows – Supports 33³ 3D LUTs with tetrahedral interpolation for smooth, precise color. A patent-pending interactive LUT preview enables real-time analysis and confident decision-making.

• Integrated Lighting – First-of-its-kind sensor-calibrated surround lighting system built into the monitor, linked to calibration for consistent viewing from set to studio to delivery.

• Seamless Calibration – Works with the Studio K-100 probe across on-set recorders (like Ninja TX), grading suites, and client monitors, ensuring identical color everywhere—even via cloud services like ATOMOSphere or Frame.io.

• Modern Connectivity – Equipped with 12G-SDI, HDMI, and four front USB-C ports for peripherals, calibration tools, and fast file access.

• Confidence & Control – Slim, powerful, and precise, the PRO-2710 provides unmatched accuracy, consistency, and workflow efficiency for grading, finishing, and client approval.

Learn about our Studio K-100 – Spectral Calibration Probe here.

The post Studio Pro-2710 – Reference Monitor (Preview) appeared first on Atomos.

Atomos TX-RX is a powerful 4K/HD wireless video transmitter and receiver system designed to streamline video monitoring and production workflows—on set, on location, or in the studio.

Engineered for creative professionals who need mobility, flexibility, and ease of use without compromise, TXRX delivers extremely low-latency HD-SDI and stunning 4K HDMI video transmission for wireless on-set monitoring over long distances, ensuring seamless video monitoring from camera to monitor, monitor to monitor, and more.

Whether you’re set up on a tripod or moving between handheld rigs or gimbals, TX-RX gives crews the freedom to change camera angles, reposition gear, or even go completely handheld without having to disconnect director or client monitors—because everything stays wirelessly connected.

ATOMTXRX01

The post Atomos TX-RX – Wireless Video Transmitter & Receiver Pack (B-Stock) appeared first on Atomos.

Professional wired over-ear headphones crafted for video and audio content creators, engineers, and studio professionals. Whether you’re capturing dialogue on set, editing sound for a film, layering instruments in a mix, or mastering the final track, StudioSonic delivers true-to-source audio precision—so you can hear every detail exactly as it was meant to be heard.

With large 50mm high-resolution drivers and an ultra-wide frequency response of 10Hz–40kHz, StudioSonic reveals the full range of your audio—deep lows, detailed mids, and crystal-clear highs. No artificial enhancements, no distortions—just clean, transparent sound so you can make confident creative decisions.

Photo credit: Speed Motion Films

The post StudioSonic Production Headphones – Wired (B-Stock) appeared first on Atomos.

Big, bright monitoring. Now with wireless video.

The Atomos Shinobi 7 RX combines the brightness and size of a full-featured 7-inch HDR monitor with built-in wireless video receiving—delivering a powerful, cable-free monitoring solution for directors, ACs, clients, or camera operators. Whether you’re working on a large set or a run-and-gun shoot, the Shinobi 7 RX brings accurate, real-time video monitoring anywhere it’s needed.

Camera Control & Touch to Focus

Take control of Canon, Fujifilm, Nikon, Panasonic, and Sony cameras via USB-C, plus Z CAM cameras via optional USB-C to serial cable.

For a list of compatible camera control and touch to focus cameras click here.

Advanced Monitoring Tools with AtomOS

Powered by AtomOS 11, the Shinobi 7 RX includes all the tools professionals rely on for exposure, focus, and framing. Use waveform, histogram, vectorscope, EL Zone, ARRI false color, frame guides, anamorphic de-squeeze, custom LUTs to get the perfect shot. The Shinobi’s unique Analysis mode also provides a suite of scopes on a single page, making it easy to compare signals at a glance.  The user interface is intuitive, responsive, and fast to navigate.

Connectivity

The addition of Wi-Fi connectivity provides a stable link between the Shinobi 7 RX and the TX component of Atomos’ TX-RX wireless video system, or a RTSP H.264 stream. This enables wireless connectivity, making it an ideal director’s monitor, focus puller’s monitor, program or preview display for video switchers.

Receive Wireless Video with TX Compatibility

Paired with the Atomos TX wireless transmitter, the Shinobi 7 RX becomes a fully wireless on-set monitor, receiving up to 4Kp30 or 1080p60 HDMI signals with low latency over 5GHz Wi-Fi. It supports wireless video transmission, giving you the freedom to monitor the shot without crowding the camera crew.

High-Brightness 7″ Touchscreen Display

With a stunning 1920 x 1200 resolution and 2200 nits of brightness, the Shinobi 7 RX is ready for indoor and outdoor viewing. Whether you’re working in direct sunlight or on a controlled set, the ultra-bright display ensures you can see every detail clearly. It’s perfect for HDR and Log workflows, with support for Rec.709, PQ, and HLG monitoring.

Built to Work on Any Set

The Shinobi 7 RX is lightweight yet rugged, with dual Sony L-series battery slots for hot-swappable power and long-lasting performance on set. HDMI input and output ensure you can also use it as a conventional wired monitor. Whether mounted to a rig, stand, or used handheld, it’s a flexible tool for every department on set—from camera to directing and beyond.

Key Features

• 7-inch 1920 x 1200 touchscreen with 2200 nits brightness
• Built-in wireless video receiver compatible with Atomos TX and RTSP H.264 sources
• Supports up to 4Kp30 or 1080p60 HDMI wireless video
• AtomOS 11 tools including EL Zone, waveform, ARRI false color, LUTs, frame guides
• HDR support for PQ, HLG, and Log-to-Rec.709 workflows
• Dual Sony L-series battery slots for extended runtime
• Lightweight and durable build for professional sets
• HDMI and SDI input/output for wired use
• Power Shinobi 7 RX or your camera with USB-C power sources

Who is it for?

The Shinobi 7 RX is designed for filmmakers, DPs, directors, and ACs who need accurate wireless monitoring in a large, daylight-viewable display. It’s ideal for remote monitoring on set, video village viewing, and mobile production environments where flexibility and reliability are key.

What’s in the box?

• 1x Shinobi 7 RX 7″ camera monitor
• 2 x Wi-Fi antenna
• 2 x Wi-Fi antenna caps
• 5 x antenna tips
• USB-C 2.0 cable (1m)
• Quick Start Guide

For a list of compatible cameras click here.

ATOMSHBRX1

The post Shinobi 7 RX – 7″ Monitor & Receiver appeared first on Atomos.

One-hand adjustment of 180 tilt.  Cold Shoe quick release mount plate.

Screwdriver tool+ hex key included.  Stand 1/4″ -20 monitor mount to standard cold shoe.

ATOMXMMQR2

The post Cold Shoe Mount appeared first on Atomos.